The RangeXTD WiFi booster setup is pretty easy that you can learn from this article. Here, we will walk you through the simple guide of two setup methods to connect the RangeXTD booster with your home router. The two setup methods are: WPS & web-interface. At the end of the article, you will get to learn the after RangeXTD setup troubleshooting tips which will help you to better the extender performance.

RangeXTD Booster Setup via WPS

This is often the simplest method if both your RangeXTD booster and router support WPS.

1. Place it in an area that receives a decent Wi-Fi signal from your router. Don't place it too far away initially. Power it on.

2. Locate the WPS button on your router. It's usually on the back or side and might be labeled "WPS". Press the WPS button on your router. The WPS light on the router should start blinking. 

3. Locate the WPS button on your RangeXTD booster. Press the WPS button on the RangeXTD booster. The WPS light on the booster should also start blinking.

4. The two devices should now communicate and attempt to connect. This process might take a couple of minutes.

5. Once the connection is successful, the Wi-Fi or link status lights on your RangeXTD booster should indicate a stable connection to your Nighthawk network.

6. Once connected, you can unplug the RangeXTD booster and move it to a location that needs better Wi-Fi coverage, ideally somewhere between your router and the weak signal area.

RangeXTD Booster Setup via Interface

Connect Computer with Extender Network

The interface-based setup method will start with connecting the PC to the extender’s network with the help of Ethernet cable. You can also without any cable via SSID network keys. The SSID network credentials are given in the user manual.

Access 192.168.7.234 Interface

Go into the computer’s web browser and enter the IP address 192.168.7.234 (default). Search it by pressing ENTER key. A RangeXTD login page, enter the admin default username and password given in the user manual of the extender. The interface will open on your computer screen.

Complete RangeXTD Extender Setup

Inside the interface, choose the host router WiFi network. Enter the password of the router and connect the extender to the router. Click NEXT, and enter the new WiFi name and password. Click SAVE button to apply the settings. then the extender will reboot. To join the network after a restart, use new WiFi password that you have just created.

Now, use these troubleshooting tips and solutions to make the setup error free and how to better the extender performance.

Troubleshooting Tips After Setup

Make the Placement Optimal

Location of the extender after setup is critical. It needs to be in a spot that receives a good, stable Wi-Fi signal from your router to extend it effectively. If the signal indicator on the RangeXTD shows low bars, try a different outlet.

Update Extender Firmware

Outdated firmware on either your router or the extender can cause technical issues. Check for and install the latest firmware updates for both devices. You can usually do this through the router's web interface and the RangeXTD setup page.

Make Sure There is No Interference

Other electronic devices, walls, and certain materials can interfere with the Wi-Fi signal. Try to position the RangeXTD away from potential sources of interference.  

Filtering MAC Address

Go into your router’s settings and check for MAC address filtering or access control. If enabled, you might need to add the MAC address of the RangeXTD to the allowed list. The RangeXTD might have a sticker with its MAC address, or it might be visible in its setup interface.

The Conclusion

In this article post, you will get to know about how to connect the RangeXTD extender with your already set router in your home. We have shared instructions for the two different methods to setup the RangeXTD extender. Hopefully, you have followed them and completes the setup. At the end of the post, we have provided tips and solutions to better the performance of your router.